ARC Racing

OHV 70MM (2.756") Cylinder assembly. This is a Hemi replacement block that uses the Fits Honda /Clone cams, sidercover and top plate. Will require modification to upper and lower dowel pin holes to...

Predator 212cc Hemi 25mm Exhaust Valve (Hemi OEM replacement). This 25mm exhaust valve has a 5.5mm stem and works with stock type retainers

OHV 212cc Bare Cylinder Head. This is a replacement head for the Hemi 212 or the Fits Honda /Clone engines. Can be used on Predator 212 Non-Hemi blocks if the dowel on holes are drilled to 11MM's...

*Depending on availability, pushrods may be black anodized or uncoated. Set of (2) .187" Diameter, 5.260" long, chromoly stock length pushrods used in GX200, 196cc Clone, BSP, and 1st and 3rd...

*Depending on availability, pushrods may be black anodized or uncoated. This is a pair of the "Do It Yourself" pushrod kit which features a 5.75" long shaft with 2 ball type ends. The rods are made...

*Depending on availability, pushrods may be black anodized or uncoated. Set of 2 .187" Diameter, chromoly pushrods. Fits Predator 212 Hemi. Stock length 5.540"

New Stainless Steel Pushrods for the BSP/Clone/GX200/ non-Hemi Predator Engines. Stock Length. Price is for 2 pushrods

 Heat Shield & Chain/Clutch Guard for MOST 196cc and 212cc OHV engines is made of 3/16 aluminum with a vertical heat shield for protecting the driver’s arm from radiating heat from the...

90mm Rings set for 420cc Predator and other Chinese OHV engines Top Ring at .076" thick 2nd at .076" thick Oil Control Ring at .106" thick These will not fit the "thin ring" pistons

Exhaust Spring Ultralite Retainer. NOT RECOMMENDED FOR SPRINGS OVER 10.8 POUNDS

Intake Spring Ultralite Retainer. NOT RECOMMENDED FOR SPRINGS OVER 10.8 POUNDS

Low lift square tip rocker arm for the BSP/Clone engines

Light wt. intake retainer for BSP/Clone  4.8-5.0 grams

BSP/Clone High Performance Head Gasket  This is a Steel,  Viton Coated, .014 Head Gasket that meets all AKRA specs for use in the Box Stock classesViton is an extremely...

HONDA   GX200 UT1 thin ring-short skirt FLAT TOP piston standard bore. This line of pistons by Honda, the UTI pistons are lighter, with shorter skirt lengths and the rings...

Kit contains two .1mm shims and two .2mm shims

GX390 Big hole blower cover

Fits Honda GX390 Oil Seal

GX390 Insulator to Head Gasket

Kit contains two .1 mm shims and two .2 mm shims

Rubber Valve Cover Gasket For The BSP Clone 196cc Engines. Seal better and last longer than the traditional cork gaskets. "May" work on the newest Gen3 Predator 212cc engines with 27/25 valves and...

MLS stands Multi Layer Steel. MLS head gaskets feature embossed stainless steel Viton coated outer layers for excellent sealing and corrosion resistance properties. 

MLS stands Multi Layer Steel. MLS head gaskets feature embossed stainless steel Viton coated outer layers for excellent sealing and corrosion resistance properties.  

Crank Bearing for our 6057 and 6058 Sidecovers

Dyno testing has shown as much as 4 tenths/HP and an average of 2 tenths/HP gain using Low Tension Ring Sets over stock OEM rings. The low tension rings are heat treated in a special...

Predator MLS head gasket .027" thick by 72mm(2.835") bore. MLS stands Multi Layer Steel. MLS head gaskets feature embossed stainless steel Viton coated outer layers for excellent sealing and...

Predator MLS head gasket .036" thick by 70mm(2.756") bore. MLS stands Multi Layer Steel. MLS head gaskets feature embossed stainless steel Viton coated outer layers for excellent sealing and...

Predator MLS head gasket .027" thick by 70mm(2.756") bore. MLS stands Multi Layer Steel. MLS head gaskets feature embossed stainless steel Viton coated outer layers for excellent sealing and...

Predator MLS head gasket .018" thick by 70mm(2.756") bore. MLS stands Multi Layer Steel. MLS head gaskets feature embossed stainless steel Viton coated outer layers for excellent sealing and...

This is the .002" undersized standard bearing used on the flathead Briggs. Used on a slightly worn crank. This bearing is also used on many stroker rods for other engines such as the Animal and GX200...