Torque Converter - 3/4" Bore for 35 and 40/420 Chain- Blue Cover

This torque converter will most likely have a blue cover!

This is an asymmetric torque converter. It is a replica of a Comet TAV2. This item will fit a 3/4" shaft engine and has both sprockets for both #35 and #40/420 chain. Comes with METRIC hardware ONLY. For most domestic engines and the newer Predator engines, SAE hardware will be required. Use kit K_OMBTAVUSABOLTS Please verify the correct hardware for your engine.

This torque converter is an asymmetrical inline small engine clutch that will help you get more power out of your small engine by reducing engine load. A torque converter acts similar to a transmission, allows higher speeds out of your small engine, and smoother acceleration. Engagement range is approximately 2350 RPM. Our torque converter fits a 3/4" shaft and comes with a 12 tooth sprocket for a #35 chain and a 10 tooth sprocket for #41 chain. It will work with small engines producing 5.5 HP - 9 HP. It is compatible on most small engines with horizontal shaft. Briggs/Robin/Tecumseh/Honda (and clones)... Kit may need to be altered to work with some 9HP & GX270 engines, Kohler/Clinton/Lifan. This unit replaces: Comet 218352A and 218353A Torq-A-Verter

Specifications:

• Driven unit: Diameter 6"
• Drive clutch bore: 3/4"
• Belt: Asymmetrical type
• Top width: 19mm(3/4")
• Sprocket teeth: 12 teeth (35 Chain) and 10 teeth (40/41/420 Chain)
• Engagement range: 2350 RPM
• Recommended engine: 5.5HP - 9HP engine, 3/4" shaft with flat key Assembly

Includes:

• Driver Unit: 1 set
• Driven Unit: 1 set
• V-Belt: 1 pc
• Driven Shaft & Gear: 1 set
• Side Retainer Plate: 1 pc
• Torque Converter Cover: 1 pc
• Metric mounting hardware

Most common engines that this unit fits are:

• Predator 212cc
• Honda GX200 and GX160
• 196cc Clone Engines

Belt size: 3/4"X 27-3/8"