Performance Engine Parts - Carburetors - OMBWarehouse.com

Quick view

OMB Warehouse

1/4'' to 3/16'' Fuel Tank to Carb Adapter 212cc 196cc 6.5HP

If you run a remote tank or you've removed your stock gas tank on a Predator 212cc, 196cc or other 6.5HP type engine this adapter allows you to run standard 1/4" fuel line to this adapter, and then use new or existing 3/16" fuel line to connect to your...

$1.30

Add to Cart
Quick view

ARC Racing

Non-EPA Carburetor for Predator 212cc Honda GX200 6.5HP Hisun

BSP/Clone/GX200/Hisun/Predator 212 Replacement Carburetor This is the stock NON-EPA type carb for the BSP/Ducar Clone engines. Nothing has been altered or changed on these carbs. The stock .028" main and .016" pilot jet are in this carb. Fits Honda...

$21.00

Add to Cart
Quick view

Mikuni Carb Kit - Round Slide 22mm - GX200 & Predator 212

22mm Round Slide Mikuni Kit, Small Body, Gas. Low buck way of adding HP! This carb is not a Japanese Mikuni. These are Chinese carbs produced under license from Mikuni. INCLUDES 22mm Mikuni Round Slide Carb Intake Manifold/adapter Air...

$99.95

Add to Cart
Sold out

Quick view

ARC Racing

Race Ready/CNC Bored Box Stock Carb

Our "615" Box Stock class carb. Airflow has been significantly increased by opening and reshaping the Venturi using a CNC machine - the same technology we use to bore our connecting rods. The fuel circuit is set to where we run them ourselves so you can...

$55.00

Out of stock
Quick view

Fuel filter, 90 degree

$3.76

$3.62

Add to Cart
Quick view

OMB Warehouse

72" Inner Throttle Cable for Mikuni and Slide Carbs

Small barrel end for Mikuni, Walbro PZ, and other slide type carburetors. This is inner cable only

$4.77

$4.50

Add to Cart
Quick view

Intake Manifold, Mikuni 33/34 mm to GX390 Predator 420

Intake Manifold, Flat Slide Mikuni to adapt to GX270/GX390 engnines and Predator 301/420 May be natural aluminum finish or black anodized depending on availability (usually these are black)

$42.99

Add to Cart
Quick view

Flat cable clamp

Flat style cable clamps to join inner cables.

$2.50

$1.50

Add to Cart
Sold out

Quick view

ARC Racing

CNC Bored .675 Racing Carb Gasoline - 196cc 212cc

This CNC bored .675 carb is designed for the Stock Appearing or Outlaw class and offers a special built ultra thin throttle shaft and knife edge butterfly that greatly increases air flow. Reworked air circuits and a unique E-Tube help regulate the fuel...

$109.95

Out of stock
Quick view

OMB Warehouse

Velocity Stack for Mikuni 24/28MM Flat Slide Carb and VM22-133

Air Filter Adapter for Mikuni Carbs. Allows use of a large filter, For 24 & 28mm Genuine Mikuni Flat Slide Carburetors.Also fits Large Body (Genuine VM22-133) 22mm Round Slide MikunisWill not fit Small Body (Chinese) Mikunis 44mm Opening 2 7/16" O.D...

$16.99

Add to Cart
Sold out

Quick view

ARC Racing

.625" Carburetor for Honda Clone Engines

CNC Bored to .625" AND using a special E-Tube and other unique parts available only with ARC carbs, this carb is tuned for use with gasoline. Airflow has been significantly increased by opening and reshaping the Venturi using a CNC machine - the same...

$77.95

Out of stock
Quick view

Intake Manifold Briggs Raptor 5HP to Tillotson

This Intake Manifold adaptor fits a 1.060" throttle bore HL Tillotson carburetor. .870 port side, to newer style 3-Hole Briggs Raptor Block. It is Designed and CNC machined to match each unique intake port shape precisely at the entrance of the...

$51.99

$48.99

Add to Cart
Quick view

OMB Warehouse

Angled Intake Manifold Assembly w/ Adapter Plate Predator 212 GX200 Tillotson

Angled intake manifold fits 196cc Clone, Honda GX200, Predator 212, Tillotson, Ducar 212, and Wildcat 223 engines This cast aluminum manifold has a billet adapter that allows the use of the small body Mikuni type carbs or the Walbro PZ22 carb. A...

$52.92

Add to Cart
Quick view

ARC Racing

Tillotson HL-334WX Air Filter Adapter

Tillotson Air Filter Adapter. Designed for HL-334WX carb, but may fit others. Approximate measurements: ID: 1-3/16" OD: 2-1/2" Bolt holes center to center: 1-15/16"

$28.95

Add to Cart
Quick view

28 mm Mikuni Flat Slide Carb Kit, GX200/Predator 212, Gas

Kit includes 28mm Mikuni Flat Slide carburetor, manifold/adapter, Air Filter, Air Filter Adapter/velocity stack, hose, & Clamps. Note: This a Square Slide carb which is far superior to the cheap round slide Mikunis. Comes with a jet kit, but some...

$210.23

Add to Cart
Sold out

Quick view

ARC Racing

Tillotson HL-334WX Racing Carburetor - Gasoline

Tillotson 4_Cycle Gas Carburetor.790 Venturi X 1.005 Throttle Bore.790 Bore Gasoline Only

$147.00

Out of stock
Sold out

Quick view

ARC Racing

Gasket, Carb to Intake / Tillotson

Stock Gaskets, Carb/Intake for Tillotson Carb (HL-334WX)

$1.25

Out of stock
SPECIAL ORDER

Quick view

OMB Warehouse

Low Profile Aluminum Fuel Tank - 4 Quart

Aluminum fuel tanks with internal sump for positive fuel pickup for sprint & speedway racing. Includes shut off valve. 6" L x 7.5" W x 5'' H

$156.31

Add to Cart
Quick view

7/16" double wire hose clamp

7/16" Double Wire Hose Clamp spring type clamp

$1.25

Add to Cart
SPECIAL ORDER

Quick view

ARC Racing

CNC Bored .675 Box Stock Carb for Methanol

This CNC bored .675 carb is designed for the Stock Appearing or Outlaw class and offers a special built ultra thin throttle shaft and knife edge butterfly that greatly increases air flow. Reworked air circuits and a unique E-Tube help regulate the fuel...

$109.95

Add to Cart
SPECIAL ORDER

Quick view

Mikuni

Carb to Manifold (Hose), 28mm Mikuni to GX270 manifold, Straight

Adapter hose for mounting 24 & 28mm on NR Racing tube style GX270 manifolds Color may vary, pic for reference only

$15.99

Add to Cart
SPECIAL ORDER

Quick view

ARC Racing

ARC DJ-3225-KIT GX390 to GX200 Methanol Carb Kit

GX390 to GX200/Predator 212 Methanol carburetor kit. This carb is CNC bored to a .900 venturi, polished, blueprinted and pre-jetted to achieve max performance on your modified engine. No important area is left untouched from the air...

$150.00

$149.99

Add to Cart
Quick view

Mikuni

Mikuni 28MM Flatslide Carb, Methanol

Genuine Mikuni 28MM Flatslide carburetor prepared for use with methanol/alcohol This is the carb only.

$179.00

$178.50

Add to Cart
Sold out

Quick view

6939 Dual Outlet Mikuni Fuel Pump

Mikuni Dual Outlet Fuel PumpBracket Mount Re-Build kit available for this pump (ARC Part 6938)

$32.00

Out of stock
SPECIAL ORDER

Quick view

OMB Warehouse

Tillotson HL Carb Kit - 7 Piece

High performance diaphragm and gasket kit for Tillotson carburetors. Gasket materials surpass OEM specifications and are resistant to all fuels used in racing applications.

$5.62

Add to Cart
SPECIAL ORDER

Quick view

OMB Warehouse

Tillotson HL Carb Kit - 5 Piece

High performance diaphragm and gasket kit for Tillotson carburetors. Gasket materials surpass OEM specifications and are resistant to all fuels used in racing applications.

$4.55

Add to Cart
SPECIAL ORDER

Quick view

OMB Warehouse

Walbro WB55 Carb Rebuild Kit

Walbro WB55 Carburetor Rebuild Kit

$9.70

Add to Cart

No more products

Performance Carburetors for Predator Engines, Honda, Yamaha, Kohler and more. Mikuni, Walbro, Tillitson and more.