Rods and Bearings

ARC Stock length billet rod with bearing inserts for the Briggs Flathead 5HP EngineARC Stock length billet rod with bearing inserts for the Briggs Flathead 5HP Engine 3.875" center-to-center. Uses Bearing inserts. Has ARC's exclusive forced oiling scoop...

Connecting Rod Bolts with Washers These bolts are 1/4-28 x 1" long 12 point. 170,000 lb tensile strength C37 Rockwell ATSM spec bolt. For use in the ARC stock length Briggs 5hp flathead rods. These will not work for the Honda GX200, 196cc Clone, or...

This is the .002" undersized standard bearing used on the flathead Briggs. Used on a slightly worn crank. This bearing is also used on many stroker rods for other engines such as the Animal and GX200. Each connecting rod listings shows the bearings and...

Fits ARC rods with stock stroke or stroker 1" (.9985") crankshaft journals. This is the standard bearing for "Stocker" 5 HP flathead rods. Also used in our 1" journal stroker rods for Jr. Dragsters and the Stroker rods for the Animal and Honda GX200 /...

Rod Bearing Briggs Vanguard

ARC Billet Connecting Rod Designed to be used in the models 40 and 44 Intek V-Twins with the Vertical Shaft. It is stock length and was designed to be used with stock pistons. They are CNC Machined from aircraft grade 7075 T-651 aluminum.4.500"Rod bolt...

Rod Bearing Briggs Boxer

This is the standard .998" bearing used on the flathead Briggs with Aluminum babbit. This bearing is also used on many stroker rods for other engines such as the Animal and GX200. Our connecting rod listings also show the bearings that are used with that...

Rod BearingIntek V Twin

Our most popular "Lite" stock length billet connecting rod for the Briggs and Stratton Animal engine. It includes ARP bolts and bearing inserts. Now legal in WKA. 3.287" Animal "Lite" Stock Rod with bearing inserts.

Rod Bolt Set, 1" LG HP Torque bolts to 170 in/lbs

3.625" Animal "Stroker" Rod with bearing inserts.ARC's +.237 stroker rod is designed to give you the most rod length you can get with the stock block and either an ARC 6580 Billet Crankshaft or a Briggs and Stratton "Raptor" crankshaft. Uses the shorter...

Billet Rod ARC Pro Series. This rod is a stock replacement for the Briggs Intek 305 Model 20 engine. Featuring ARC's trademark forced oil dipper. CNC machined from aircraft grade 7075-T651 aluminum. Other key features include an oil groove in the crank...

Billet Rod 4.235" INTEK 305 StrokerStroker for JE pistons with 3" to 3.25" bore.Rod bolt torque: 170 in/lbs lubricated

ARC Billet Connecting Rod, Briggs Flathead Stock Replacement ARCs Enduro SeriesCNC Machined from aircraft grade 7075 T-651 Aluminum and have been tested to an average of 12,500 rpmARC Billet Rod Enduro 3.875" * The Enduro line of ARC Billet...

Billet Rod ARC Enduro Series CNC Machined from aircraft grade 7075 T-651 aluminum. Our 1" Stroker Rods are designed to handle the rigors of todays high horsepower Junior Dragster and open Kart Engines. These Rods are designed for aftermarket...

Billet Rod ARC Pro Series. This rod is a stock replacement for the Briggs Intek 305 Model 20 engine but requires .062" to be machined off the top of the piston. Featuring ARC's trademark forced oil dipper. CNC machined from aircraft grade 7075-T651...

3.281" Animal "Short-Lite Stock Rod" with bearing inserts. 3.281" Animal "Short-Lite Stock Rod" with bearing inserts. This is a .006" shorter version of our popular 6247 "Lite" stock length billet connecting rod for the Briggs and Stratton Animal engine...

Billet Connecting Rod 5.175 Briggs Vertical Model 28. This rod reqiures the removal of .050" material from the top of the piston. Inspection of piston is needed to assure there is sufficient materail available.Rod bolt torque: 26 ft/lbs Lubricated