Magna-Matic
Magna-Matic 10400-08-KIT Caster Bracket/Wheel Kit for Stand
PART NUMBER:
2787597
Availability:
Ships same day if ordered before 12PM Eastern time.
In Stock Today:
99
Ships in:
Ships in 1-3 Days
$68.00
"
This wheel kit is a fantastic solution for those who would like to move their blade service system around the shop. Whether it is to roll it into storage for winter or to roll the whole system outside so you don't have a grinding mess inside your shop this wheel kit will make easy work of moving your equipment. We have designed the bracket to give it two fixed wheels that allow the operator to tilt it back much like a two-wheel hand-truck. This way when it is standing on all four of its industrial leveling feet the wheels are not contacting the ground and there is no risk of tipping over or rolling away while grinding.
IMPORTANT SAFETY NOTE: The Caster Bracket/Wheel Kit comes with a bottom cover to seal off the bottom of the stand's column so that more weight can be added to the stand. For safety it is required that you fill the column with additional weight to offset the weight of the sharpener. This makes it much easier and safer when moving the stand on its wheels. Recommended material = 3/4"" aggregate washed stone (approx .75 cu ft will fit in the column) fill the column about 6"" from the top of the column. We do not recommend sand as it holds moisture.
This wheel kit will ONLY fit the MAG-10400 and MAG-10450 stands
ALL NECESSARY HARDWARE INCLUDED
Country of Origin:USAMaterial:SteelFinish:Powder Coated
"
Magna-Matic 10400-08-KIT Caster Bracket/Wheel Kit for Stand
$68.00
"
This wheel kit is a fantastic solution for those who would like to move their blade service system around the shop. Whether it is to roll it into storage for winter or to roll the whole system outside so you don't have a grinding mess inside your shop this wheel kit will make easy work of moving your equipment. We have designed the bracket to give it two fixed wheels that allow the operator to tilt it back much like a two-wheel hand-truck. This way when it is standing on all four of its industrial leveling feet the wheels are not contacting the ground and there is no risk of tipping over or rolling away while grinding.
IMPORTANT SAFETY NOTE: The Caster Bracket/Wheel Kit comes with a bottom cover to seal off the bottom of the stand's column so that more weight can be added to the stand. For safety it is required that you fill the column with additional weight to offset the weight of the sharpener. This makes it much easier and safer when moving the stand on its wheels. Recommended material = 3/4"" aggregate washed stone (approx .75 cu ft will fit in the column) fill the column about 6"" from the top of the column. We do not recommend sand as it holds moisture.
This wheel kit will ONLY fit the MAG-10400 and MAG-10450 stands
ALL NECESSARY HARDWARE INCLUDED
Country of Origin:USAMaterial:SteelFinish:Powder Coated
"
Related Products
