Performance Engine Parts - OMBWarehouse.com

Now Until 1/1/2025 - Spend $200 & use code HAPPYNEWYEAR to get a $25 gift card!

Quick view

Autolite

AR3910X Racing Spark Plug - Predator & Honda Clone

This is the spark plug you want for high performance Gasoline or Methanol. We have seen as much as a 3/4 HP gain simply by changing to this plug. Plug fits Predator 212cc , Predator 301cc, Predator 420cc engines Also fits Clone 196cc, GX160, GX200...

$13.73

$8.99

Add to Cart
Quick view

OMB Warehouse

Throttle Assembly for Ungoverned Engines GX200 Predator 212

This is the throttle you have been waiting for! Use your stock fuel tank and still have great throttle action for ungoverned engines! Made from heavy gauge stainless steel, this throttle is the smoothest you will find. A nylon bushing supports the...

$22.99

Add to Cart
Quick view

OMB Warehouse

Predator 212cc / Clone 196cc Air Filter Kit

This kit will fit Predator 212cc, Honda GX160/GX200, Tillotson, and most Chinese 6.5HP OHV Clone engines. This contains the parts included in our performance kits that use the standard adapter. (1) Angled Air Filter 3-1/2 x 4 (1) Billet Aluminum...

$27.99

Add to Cart
Quick view

ARC Racing

18 LB Valve Springs (Pair) Honda GX200, Predator 212 Non-Hemi

Honda GX200 18 LB Valve Spring. Although this spring is not legal for the box stock classes, it offers another option for those looking for that "magic" combination. These springs will fit most 6.5 OHV engines, but NOT the Predator 212 Hemi (60363)...

$10.00

Add to Cart
Quick view

OMB Warehouse

212cc Jet Kit Predator Tillotson Ducar

Jet kit for Honda GX200, 196cc Clone, and Predator 212 engines. Includes a 140 emulsion tube and two jets: .036" and .037". If your engine runs poorly, or on half choke after upgrading your Air Filter and Exhaust, this Kit will most likely solve your...

$18.50

Add to Cart
Quick view

OMB Warehouse

1/4'' to 3/16'' Fuel Tank to Carb Adapter 212cc 196cc 6.5HP

If you run a remote tank or you've removed your stock gas tank on a Predator 212cc, 196cc or other 6.5HP type engine this adapter allows you to run standard 1/4" fuel line to this adapter, and then use new or existing 3/16" fuel line to connect to your...

$1.30

Add to Cart
Quick view

NR RACING

8 Degree Offset Key

Offset Flywheel Key for GX200 / GX160 / Clones / Predator Offset Flywheel Key for GX200 / GX160 / Clones / Predator These keys are extremely popular and a favorite for racers using our 6619 and 6625 flywheels that want to adjust and tune timing for...

$8.95

Add to Cart
Quick view

ARC Racing

Side Cover Gasket - For Honda GX200 / Clone / Hemi 212

Honda GX200 / Clone / Predator HEMI 212 Side Cover Gasket Does NOT fit 2009 Harbor Freight or Homier

$2.50

Add to Cart
Quick view

ARC Racing

(2) Pack of 22Lb Valve Springs

2 Pack of 22Lb Valve Springs.These springs are recommended for use with the stock retainers. 22lbs @ .850"

$9.99

Add to Cart
Quick view

ARC Racing

Intake Insulator to Cylinder Head Gasket

BSP Clone GX200 Predator 212 Intake Insulator to Cylinder Head Gasket. Fits most 6.5HP engines

$1.50

Add to Cart
Quick view

NR RACING

Carb Float Bowl Gasket for Predator 212cc Honda GX200 196cc 6.5HP

This is the stock O-Ring for the float bowl on both the Huayi and RuiXing Clone carbs.

$1.44

Add to Cart
Quick view

OMB Warehouse

Go Kart Weiner Pipe AKRA Legal w/ Standard Muffler Predator 212cc

AKRA legal Weiner Pipe for Honda, Clones, and Predator Engines. Fits GX160, GX200, Clones, and Predator 212cc motors. Weenie pipe comes with a standard, non-restricted, screw-on muffler! THIS IS A SMALL DIAMETER AKRA SPEC PIPE FOR GO KART RACING An extra...

$29.95

$19.95

Add to Cart
Quick view

OMB Warehouse

Breather Kit for Billet Air Filters Predator 212 Clone GX200 BSP

Vent your fuel tank and valve cover when using the popular billet air filter kits! This kit includes a breather for the fuel tank and one for the valve cover. A zip tie is included for the valve cover breather hose. This fits all popular Predator, Clone,...

$13.99

$9.99

Add to Cart
Quick view

OMB Warehouse

Throttle Clevis & Spring

Throttle Clevis & Spring

$2.21

Add to Cart
Quick view

ARC Racing

Non-EPA Carburetor for Predator 212cc Honda GX200 6.5HP Hisun

BSP/Clone/GX200/Hisun/Predator 212 Replacement Carburetor This is the stock NON-EPA type carb for the BSP/Ducar Clone engines. Nothing has been altered or changed on these carbs. The stock .028" main and .016" pilot jet are in this carb. Fits Honda...

$21.00

Add to Cart
Quick view

ARC Racing

Pulse Inlet Fitting for 1/4" Line 1/8NPT

ARC uses these fittings to install in the Clone's Valve Cover in order to Pulse the Fuel Pump. We sell the Valve Cover with the fitting already installed as well.

$1.95

Add to Cart
Quick view

ARC Racing

Carb & Intake Gasket - 196cc BSP / Clone / Predator 212

This OEM gasket for the BSP/Clone engine goes between the stock carburetor and the black intake insulator. An extra gasket is needed if a restrictor plate is used.

$1.50

Add to Cart
Quick view

ARC Racing

Stock Crank Seal BSP Clone GX200 Predator 212

BSP Clone GX200 Predator 212 stock crank seal. Works on either side of the crankshaft

$3.00

Add to Cart
Quick view

OMB Warehouse

Angled Air filter 3-1/2" x 4" x 2-7/16"

Fabric Air Filter The standard angled air filter used in most 4 cycle karting engines. 3-1/2" x 4" with a 20 degree angle. The inside diameter of the mounting flange is 2-7/16". Most OHV kart engines will require an angled air filter! 3-1/2" X...

$22.12

$10.84

Add to Cart
Quick view

OMB Warehouse

Throttle Linkage Kit - Predator 212cc NON-Hemi Honda 196cc BSP 6.5HP

Throttle linkage kit that fits Predator 212 NON-Hemi engines as well as GX160 GX200/196cc Clone. This kit is for ungoverned engines only. *Will not work with the Predator, Tillotson, Ducar, or WildCat hemi engines due to the difference in valve cover...

$10.36

$9.87

Add to Cart
Quick view

OMB Warehouse

Walbro FPC-1 Fuel Pump

Genuine Walbro FPC-1 fuel pump for 1/4" hose

$29.95

Add to Cart
Quick view

ARC Racing

Exhaust Gasket Honda Clone 196cc 6.5HP

Honda GX140, GX160, GX200 - Box Stock Project Exhaust Header Gasket DOES NOT FIT Predator engine without modification.

$2.00

Add to Cart
Quick view

ARC Racing

Crank Shim Kit GX200 Clone Predator 212 224 Tillotson

Kit contains two .1 mm shims and two .2 mm shims

$3.75

Add to Cart
Quick view

OMB Warehouse

Breather Filter 12mm

This valve cover breather filter is perfect for use when adding an aftermarket air filter to the Clone, Honda, BSP, and Predator engines. Rubber end has a 12mm opening.

$9.99

Add to Cart
Quick view

Underseat Minibike Staged Header Predator 212 GX160/200 196cc Clone

High Performance 3 Stage Mini-Bike Header with improved flange to pipe transition Pipe exits between tire and frame. Fits most "old school" mini-bikes. Pipe now has 3 stages with the final stage to accept 1 5/16" mufflers. The black color is for pictures...

$31.99

Add to Cart
Quick view

ARC Racing

3720 ARC #35 Chain Break

ARC Precision Chain Break for #35 chain. Made in Albany Ga. The finest chain break on the market.

$22.00

Add to Cart
Quick view

1" Header Sleeve Woven Material

Thermal sleeving capable of withstanding 1100 degree Fahrenheit continuous. This non-flammable sleeve has a special weave that allows it to expand and contract over fittings. In addition, it has that old school sleeve look with modern heat shield...

$8.99

Add to Cart
Quick view

OMB Warehouse

Muffler Exhaust Flange for Predator 212cc / BSP Honda Clone 196cc

Honda/Clone/Predator 212cc Laser Cut FlangeHonda/Clone Laser Cut Exhaust Flange Approximate Measurements: Center Hole ID: 1" Center to Center of Bolt Holes: 1-3/4" Laser cut from 1/4" plate

$5.00

$1.50

Add to Cart
Quick view

NR RACING

4 Degree Offset Key

Offset Flywheel Key for GX200 / GX160 / Clones / Predator Offset Flywheel Key for GX200 / GX160 / Clones / Predator These keys are extremely popular and a favorite for racers using our 6619 and 6625 flywheels that want to adjust and tune timing for...

$10.50

Add to Cart
Quick view

OMB Warehouse

Camshaft Installation Tool

Camshaft Installation Tool Made from .220" thick acrylic, this tools allows you to mock up your engine and inspect clearances such as cam lobe to cylinder, cam to rod, and crank to cam. Simply slide this tool over the cam and crank and lightly bolt to...

$15.00

Add to Cart
Quick view

OMB Warehouse

3/4" Crankshaft Holder Tool

Crankshaft Holder Tool for 3/4" cranks No more struggling to hold the crank when torqueing a flywheel! This tool slides over any 3/4" keyed crank and allows the flywheel to be torqued properly. Simply slide this tool onto the crank, insert key and the...

$21.95

Add to Cart
Quick view

Rotary Corp

1/4" Hose Clamp - Green

Rotary Corp brand aftermarket product. 1/4" Hose Clamp - Green These work well with the 1/4" clear/colored fuel lines

$1.25

Add to Cart
Quick view

OMB Warehouse

USA Made Exhaust Pipe Header w/ Muffler Fits Coleman CT200U KT196

Made in USA - designed in USA. Under-seat 1" Exhaust Header with Screw-on Muffler Fits Coleman CT200U Mini Bikes and KT196 Go Karts. Fits all 196cc 212cc 224cc 6.5HP Engines. This header does not fit the CT200U-EX "camo" bike, RB/RT200, B200R, or the...

$28.95

$19.99

Add to Cart
Quick view

Mikuni

Mikuni Throttle Bracket Predator 212 Ghost GX200 Clone

Finally, there is a way to use a vintage throttle and a Mikuni carb! This bracket bolts to the side cover of most 6.5HP OHV engines, such as the Predator 212, GX200, and Clones. Perfect for minibikes and go karts. Once bolted to the side cover you can...

$19.99

$19.95

Add to Cart
Quick view

ARC Racing

Carburetor Stud / Bolt for GX200 / Clones

Carburetor Stud / Bolt for GX200 / Clones. This is the longer stud you need for Predator engines to mount an aftermarket air filter. This stud is approx 115mm - 4-1/2" long.

$2.50

Add to Cart
Quick view

COLEMAN

Header with Muffler Fits Coleman CT200U-EX BT200X

Header with Muffler Fits Coleman CT200U-EX BT200X. Fits many other minibikes and go karts too! This header stays under the frame to help prevent header burns. This is a right side exit header with a screw-on muffler to keep the neighbors happy! Kit...

$39.95

$38.95

Add to Cart
Quick view

ARC Racing

Carb. Throttle Rod & Spring

Carb. Throttle Rod & Spring Stock item for CloneAlso fits Baja MB200 - replaces MB200-341 and MB200-342 governor rod and governor spring.Carb. Throttle Rod & Spring Stock item for Clone

$3.00

Add to Cart
Quick view

OMB Warehouse

Mini Bike Pipe w/ Muffler - Under seat style

Tighter bend pipe that shoots straight behind a mini bike underneath your seat. Comes with a screw on muffler. For Honda Clone GX160, GX200, Predator 212cc. Perfect for mini bikes so the pipe doesn't burn your leg. 8" clearance from motor mount to pipe...

$47.95

$37.95

Add to Cart
Quick view

Rotary Corp

3/16" Hose Clamp - Black

Rotary Corp brand aftermarket product. 3/16" Hose Clamp - Black

$1.25

Add to Cart
Quick view

OMB Warehouse

Throttle Cable Clevis

Throttle Cable Clevis - Includes allen wrench

$2.50

Add to Cart
Quick view

ARC Racing

Valve Cover Gasket For GX200 / Clone / Predator 3rd Gen Non-Hemi Engines

Valve cover gasket replacement for GX200 / Clone / Predator 212 3rd Generation Non-Hemi engines. This does NOT fit 2009 Harbor Freight engine

$2.00

Add to Cart
Quick view

OMB Warehouse

Air Filter Kit for Predator 301cc 420cc and GX240/270/340/390 Engines

Air filter adapter kit for 8-16HP OHV Clone engines (1) Air Filter (1) Adapter to fit GX240, GX270, GX340, GX390 and Predator 301 & 420 (1) Choke hold bracket (1) Gasket Airflow increase is so significant that your engines may require a carburetor...

$38.99

Add to Cart
Quick view

DynoCams

Dyno Cams CM 265 HOT Grind Super X - Hemi 212cc GX200 196cc

Dyno "CM" Modified Superbox Cam for Honda GX200, Predator 212 HEMI, or BSP Clone 6.5 with bored stock carb or tilly carb.* This cam provides .265" lift at the cam, which works out to .275" lift with the stock rockers.* Intake duration is 236 and Exhaust...

$58.95

Add to Cart
Quick view

NR RACING

6 Degree Offset Key

Offset Flywheel Key for GX200 / GX160 / Clones / Predator Offset Flywheel Key for GX200 / GX160 / Clones / Predator These keys are extremely popular and a favorite for racers using our 6619 and 6625 flywheels that want to adjust and tune timing for...

$8.59

Add to Cart
Quick view

Predator

.020" Pilot Jet predator 212 GX200 Clone

Suggested for Race Carbs For use with Open Element Air Filter on Std Bore Carb, Gas .020" Stock Carbs use .016" Will not fit the SP brand carbs

$5.99

Add to Cart
Quick view

Exhaust Stud Kit

Replacement Exhaust Studs and Flanged Nuts.

$3.99

Add to Cart
Quick view

ARC Racing

(2) Pack of 26Lb Valve Springs, White

2 Pack of 26Lb "White" Springs. Use as intake spring when using stock intake valve and ARC DJ-1046 Spring retainer. Use as Heavy spring for intake and exhaust when using our stainless (DJ-1121,22 and 26) valves. Not recommended with stock retainers.

$12.99

Add to Cart
Quick view

OMB Warehouse

Briggs Raptor Throttle Kit

Throttle linkage kit for Briggs & Stratton Raptor and Pulsa-Jet carb 5 HP engines. This kit will not work with the later "fixed jet" carbs that have the two air filter threaded holes at the top of the intake

$8.21

Add to Cart
Quick view

New Predator 212cc Upgraded Air Filter Kit

This is the newest version of our Predator performance air filter kit. The kit comes with the following: K&N style angled air filter 3-1/2" x 4" ARC billet aluminum air filter adapter, Made in the USA Outwears pre-filter in black Bored carburetor...

$39.99

Add to Cart
Quick view

ARC Racing

ARC 6057 Dual Bearing Billet Sidecover for GX200/Clone Predator Hemi, Ghost, and 224

The long anticipated Billet Sidecover for the GX200/Clone 196 and Predator Hemi, Ghost, Tillotson 212 Engine has arrived. It has the attention to detail and good looks that have come to be expected of ARC's billet products. It features side by side dual...

$149.95

$149.50

Add to Cart
Quick view

ARC Racing

Standard Stock Flywheel key

Standard Stock Flywheel key Fits Honda GX160/200/240/270/390 Predator 196/212/301/420 196cc Clones and many other Chinese OHV engines

$2.00

Add to Cart
Quick view

Rotary Corp

3/4" NPT Muffler - Screw In

Rotary Corp brand aftermarket product. Fits 9, 9B, 9F, 9R, 100200 series, 130200, 131200 series (5 hp horizintal), 170400 series (7 hp horizontal), 170700, 171700 series, 190400 to 190799 (8 hp horizontal), 1954-series (8 hp horizontal.Fits 9, 9B, 9F,...

$14.76

$7.01

Add to Cart
Quick view

OMB Warehouse

Foam Pre-Filter Red 3-1/2"x5"

$2.41

Add to Cart
Quick view

ARC Racing

(2) Pack of GX240/GX390/Predator 420 Heavy Duty 50# Valve Springs

2 Pack of Heavy Duty Valve Springs for Honda GX240, GX270, GX340, & GX390.Approx 50 lbs at 1.125 installed height, 42lbs at 1.2, with 110 lb open pressure (.375 lift).

$12.99

Add to Cart
Quick view

RLV

RLV 5348C Exhaust Header Pipe GX200 Clone Predator 212

RLV EXF5060 Header. 1" pipe with 2 stages to 1-5/16" This pipe is intended for use on racing go karts. It may fit other applications Fits Predator 212cc and Clone 196cc Engines, Box Stock Project. RLV Header Pipe

$35.89

$34.95

Add to Cart
Quick view

ARC Racing

"140" Emulsion Tube Predator 212 196cc Clone GX200

This E-tube has a slightly larger main bore and less air bleed holes providing a better fuel signal at the jet. Improves performance accross the RPM range, but especially on bottom end and mid range. You will want a main jet between .035" and .037"...

$6.99

Add to Cart
Quick view

NR RACING

High Performance Lash Caps (pair) Clone GX200 Predator 212 Hemi

Ultra lite, hardened lash cap for 5.5mm valves such as those used in GX200, clone, BSP, Predator 212 Hemi, and Yamaha F200. Can be used with stock and stainless valves when using our ARC_DJ-1047 valve spring retainers/keepers. These will not work as...

$8.99

Add to Cart
Quick view

ARC Racing

Intake Valve Seal Clone GX200 196cc Clone

Stock OEM intake valve seal. Clone/GX200 as well as the Predator 212 Non-Hemi Engines with 5.5mm valve stems.

$2.14

Add to Cart
Quick view

ARC Racing

Air Box to Carb Gasket - Honda GX200 / Clone / Predator 212

Heavy rubber coated gasket that goes between the airbox or air filter adaptor and the stock carburetor

$2.50

Add to Cart
Quick view

ARC Racing

ARC 6619 Billet Flywheel For GX200 Clone Tillotson 212 Predator 224 Ghost

APPROVED FOR AKRA BOX STOCK CLASS SFI certified billet aluminum flywheel. The keyway is fixed and the stock pull starter can be used. Weighs 3.5 lbs and incorporates a special low drag fan design unique to ARC flywheels. A specially designed high-power...

$120.00

$119.50

Add to Cart
Quick view

ARC Racing

Stainless Steel Valve Kit Predator 212 Hemi Predator 224 Max Performance

Everything you need to upgrade your Predator 212 Hemi or Predator 224 Max Performance to stainless valves. Comes with stock size (27mm & 25mm with 5.5mm Stems) stainless valves, keepers and retainers, valve springs(26lb) and lash caps. A must have...

$62.88

$62.50

Add to Cart
Quick view

Outerwears

Outerwears Prefilter, 3-1/2" x 4" (Black)

A simple, inexpensive way to protect your engine without sacrificing horsepower. Pre-Filters are made from high quality materials with a welded seam for strength. They will work on any exposed air filter and will NOT void your warranty. Guaranteed to...

$18.43

$13.28

Add to Cart
Quick view

OMB Warehouse

Header Exhaust Muffler Wrap Tape

10' x 2'' x 1/16'' Universal Muffler / Header / Exhaust Wrap.

$12.65

Add to Cart
Quick view

OMB Warehouse

Strut Mount Catch Tank

1-5/8" x 4". Made from billet aluminum. Hardware included. For use with 1/4" x 3/8" fuel line.

$17.40

Add to Cart
Quick view

ARC Racing

Push Rod Guide Plate

Guide Plate for 1.3 Rockers Required for use with 1.3 ratio Stamped Rockers (Part # ARC_DJ-1100) For use on Hona GX160/GX200, 196cc Clones, and Predator 212 Non-Hemi engines.

$11.95

Add to Cart
Quick view

OMB Warehouse

1" Go Kart Exhaust w/ Screw on Muffler For Predator 212cc/Clone Engines

1" Go Kart Exhaust w/ Screw on Muffler to fit onto Predator 212cc/Clone 212cc, 196cc EnginesNo drilling required! Total length from end to end with muffler screwed on is approximately 13".Height of pipe from mounting area to screw on end is approximately...

$30.00

$23.99

Add to Cart
Quick view

ARC Racing

HP Valve Spring Retainer & Keeper Locks for 5.5mm Stems

Fits 5.5mm valve stem and our HP valve springs. To be used with our stainless valves. Sold in singles, so you will need two.

$11.00

$10.99

Add to Cart
Quick view

Mikuni Carb Kit - Round Slide 22mm - GX200 & Predator 212

22mm Round Slide Mikuni Kit, Small Body, Gas. Low buck way of adding HP! This carb is not a Japanese Mikuni. These are Chinese carbs produced under license from Mikuni. INCLUDES 22mm Mikuni Round Slide Carb Intake Manifold/adapter Air...

$99.95

Add to Cart
Quick view

ARC Racing

(2) Stainless Steel Push Rod GX200 Clone BSP Predator 212 Non-Hemi

New Stainless Steel Pushrods for the BSP/Clone/GX200/ non-Hemi Predator Engines. Stock Length. Price is for 2 pushrods

$6.99

Add to Cart
Quick view

ARC Racing

Stock Ignition Coil Clone GX200 Predator 212

Stock Coil fits BSP, 196cc Clone. GX160/GX200, Predator 212, and Predator 173cc vertical shaft engines

$13.00

Add to Cart
Quick view

Plasti-Gauge

Use to measure to measure rod clearance.

$5.49

Add to Cart
Sold out

Quick view

Honda

Carb Insulator with Vacuum port - GX390 Predator 420cc 13HP Clones

Carb insulator with vacuum port for Honda GX270, GX340, GX390 and Predator 420cc engines. This spacer allows for a great pulse line for pulse type fuel pumps such as Walbro fuel pump WB100 The nipple for the pulse line is for 3/16" hose Please note this...

$8.95

Out of stock
Quick view

Outside the Frame Staged Header GX200 Predator 212 196cc Clone

Mini-Bike pipes that exits to the left side. Great for applications where there is not enough between tire and seat for Center Pipe.Pipe is flared to 1 5/16" for use with RLV 1 5/16" Mufflers. Can also be used w/o a muffler for maximum performance and...

$29.99

Add to Cart
Quick view

RLV

1" RLV Exhaust Silencer

1" RLV Exhaust Silencer. Slip-on fit for 1" headers. Use RLV_4140 to complete installation RLV Enviro-Safe 4-cycle silencers are WKA legal & IKF approved. Designed to reduce noise (4 dB to 6 dB) and backfire of the 4 cycle engine, not the horsepower.

$45.95

$45.25

Add to Cart
Quick view

Mikuni

50" Throttle Cable Mikuni End

50" total length cable with barrel and slide carb ends

$18.95

Add to Cart
Quick view

ARC Racing

ARC Billet Oil Cap for ARC Billet Sidecovers

Billet Oil Fill Cap w/ o-ring Fits ALL ARC Billet sidecovers only This will NOT work in the following engines Tecumseh Briggs and Stratton Predator Honda Ducar Tillotson Clinton Lauson Powerfist PowerHorse Carroll...

$9.00

Add to Cart
Quick view

RLV

1" Exhaust Silencer, Mini 91 "Slip On"

Finally a small diameter, lightweight, silencer for 1" header pipes! This Mini 91 silencer has a total length of 4-1/2" and 1-5/8" diameter Use clamp part numbers 1668575 or 789433 The clamp that is included is for safety wire and not to attach the...

$19.95

Add to Cart
Quick view

ARC Racing

ARC Flywheel Puller

This flywheel puller is designed for those who don't want to use the "knocker" method to remove their flywheel. Works with: ALL ARC Flywheels with Steel Adjustable Timing Hubs PVL Clone flywheel Raceseng Flywheels To use, install the threaded...

$23.99

Add to Cart
Quick view

NR RACING

Inner Throttle cable, Stainless, Mikuni End

Inner Thottle Cable for Mikuni Carbs, No Conduit

$3.99

Add to Cart
Quick view

RLV

RLV 1-5/16" Stainless Muffler Clamp

1-5/16" Stainless steel silencer clamp for B91XL or B91MO

$6.95

Add to Cart
Quick view

ARC Racing

Choke Assembly Bracket

This little bracket bolts to the back of our billet air filter adapter to keep the choke lever in place. Without the stock air box, or this little device, the choke lever will pop off. This bracket requires the odd-shaped, thick, rubber-coated metal...

$3.00

Add to Cart
Quick view

ARC Racing

Stock Main Crankshaft Bearing 196cc Clone GX200 Predator 212

This is a much better bearing than what comes in a clone engine. Visually identical to the standard bearing, but they roll WAY better. These are not ceramic or coated or anything that would be considered illegal, they are just a higher quality bearing at...

$6.99

Add to Cart
Quick view

ARC Racing

DJ-1336 BSP / Clone Rubber Valve Cover Gasket

Rubber Valve Cover Gasket For The BSP Clone 196cc Engines. Seal better and last longer than the traditional cork gaskets. "May" work on the newest Gen3 Predator 212cc engines with 27/25 valves and split keeper retainers

$4.50

Add to Cart
Quick view

RLV

RLV Stock 1 5/16" Muffler (BP)

RLV 4104 "Stock" muffler (B91XL 1-5/16") Comes with a clamp for the support bracket only. No clamp for the muffler to pipe is included

$47.99

$46.99

Add to Cart
Quick view

OMB Warehouse

Race Ready Mega Jet Kit

Mega jet kit for Honda clone, GX160, GX200, Predator 212cc, GX340, GX390, Predator 420cc, and other engines. Includes (1) each of the following jets: .034, .035, .036, .037, .038, .039, .040, .041, .042. Stock jets on GX200s are .028. Stock jets on...

$24.99

Add to Cart
Quick view

Sidecover Gasket .020" Clone BSP Predator 212 HEMI

.020" Thick Sidecover gasket for the GX200 Clone BSP and Predator 212 HEMI engines

$3.34

Add to Cart
Quick view

Rotary Corp

Ring Compressor

Rotary Corp brand aftermarket product. For cylinders 1-1/2" to 3" diameter. Made of blued spring steel. Leaves warehouse in 1-2 business days.

$18.95

Add to Cart
Quick view

NR RACING

2 Degree Offset Key

Offset Flywheel Key for GX200 / GX160 / Clones / Predator Offset Flywheel Key for GX200 / GX160 / Clones / Predator These keys are extremely popular and a favorite for racers using our 6619 and 6625 flywheels that want to adjust and tune timing for...

$10.50

Add to Cart
Quick view

DynoCams

PVL Aluminum Flywheel - 196cc Clone GX200 Tillotson Predator 224 Ghost

The PVL Flywheel for Clone is NOW available for use with STOCK COIL Engine: Clone 196cc, Honda GX160/200, Tillotson, WildCat 223, Ducar 212, Predator 224, Predator GhostMaterial: Diecast AluminumWeight: 3.8 lbsTiming: 28 Deg.Fins: 12 Coil gap to be set...

$87.95

Add to Cart
Quick view

Billet Valve Cover Spacer GX200 Predator 212 Non-Hemi

Valve Cover Spacer allows roller rockers to clear Valve Cover Baffle. Tapped for pulse fitting to run fuel pumps or venting Includes bolts, gasket, Pulse fitting, and Plug (if pulse fitting not needed) Spacer is 0.600" thick

$32.99

Add to Cart
Quick view

OMB Warehouse

Throttle Clevis 2-Piece

Throttle Clevis 2-Piece Aluminum

$4.35

Add to Cart
Quick view

ARC Racing

Rocker Assembly (Non-Hemi)

Will NOT fit GX200 because the rocker stud has a different thread pitch.Will fit Predator head.

$5.99

Add to Cart
Quick view

ARC Racing

Stainless Steel Upgrade Valve Kit GX200/Clone

Comes with stock size(25mm & 24mm) stainless valves, keepers and retainers, valve springs(26lb) and lash caps. Everything you need to upgrade your GX200/Clone/1st Generation Predator 212 to stainless vaves. Comes with stock size(25mm & 24mm)...

$61.31

Add to Cart
Quick view

ARC Racing

Flywheel/Starter Cup Nut Clone GX200 Predator 212 Tillotson

This is a standard stock replacement nut for the flywheel of the Clone, Hnda GX200, Predator 212, Tillotson 196/212, and most Chinese 6.5 HP engines. It is flanged and designed for maximum hold when tightened.

$2.00

Add to Cart
Quick view

Socket 1/4" Drive, 12 Point 1/4"

Use the right socket when torquing ARC rod bolts! This 1/4" drive, 12 point, 1/4" socket will help you get the proper torque on your new billet rod!

$6.99

Add to Cart
Quick view

ARC Racing

Thin Sidecover Gasket .012" GX200 Clone Predator Hemi 212

New, Thinner Sided Cover Gasket for Clone GX200 Predator 212 HEMI Engines. .012" Thick Tighten up crank end play or stack with standard gasket to increase crank end play.

$2.00

Add to Cart
Quick view

ARC Racing

Sidecover Bolt GX200 Clone Predator 212

Sidecover Bolt Clone / GX200 / Predator 212

$1.25

Add to Cart
Quick view

OMB Warehouse

3' Foot 1/4" ID X 3/8" Fuel Gas Line Blue Minibike Go Kart Trike ATV UTV Cycle

3' Length Of 1/4" ID X 3/8" OD Blue Fuel Line This premium vinyl fuel line will work for your various outdoor power equipment. Special formula, vinyl gas and oil tubing for mini bikes, go karts, chain saws, small engines, snowmobiles, mowers etc...

$9.99

$7.00

Add to Cart
Quick view

Valve Grinding Compound 120 and 220 Grit

High temperature grease for lapping, grinding, sharpening and polishing metal surfacesContains sharp, graded and extremely hard grains of silicone carbide. Two .75 ounce tubes included Helps in valve grinding operations on automotive, industrial and...

$9.95

Add to Cart
Quick view

ARC Racing

On/Off Switch DJ-1203

Original Stock Part On / Off Switch for GX200 / Clone Engines

$2.00

Add to Cart

Items 1 to 100 of 960 total

1
2
3
4
5
6

Small Engine Performance parts for Predator, Briggs, Honda, Box Stock 196cc & Clone Engines. Replacement parts, Stage Kits and more.