Cart is empty
Cart is empty
Phone orders: (267) 580-5824
Categories
Manufacturers
Special
Honda / Clone
Honda Clone 6.5 GX160 / GX200 / Predator Performance Parts
Image |
Product | Add |
|---|---|---|
|
(10) Drilled Allen Bolts (8MM X 20MM)(10) Drilled Allen Bolts (8MM X 20MM) & 5 feet of safety wire.
SKU: KPHCAB
|
$6.99
|
|
1" Mini Bike Exhaust w/ Screw on Muffler Honda/Clone1" Mini bike exhaust with screw on muffler for Honda/Clone motor
SKU: KPHM
|
$25.00
|
|
1-5/16" Aluminum Muffler Clamp1-5/16" Aluminum Muffler Clamp
SKU: KPXLMC
|
$7.99
|
|
4 Stage Pipe w/ Bugle Tip Honda/Clone4 Stage Unmuffled Exhaust Pipe w/ Bugle Tip for Honda/Clone
SKU: BPHM2
|
$35.00
|
|
5-3/4" Billet Flywheel Honda/Clone GX200ARC Flywheel 6607-GX200 Features: - Finned for cooling - 14 degrees of Adjustable Timing with ARC's signature adjustable timing hub - Small 5 3/4" diameter and lite 3.5 lb weight for quick revving and faster acceleration - Uses Powerful Rare Earth Magnet - Use ARC 5982 Coil Bracket and stock DJ-1260 Coil
SKU: ARC6607-GX200
|
$204.00
|
|
ARC Billet Rods, Honda GX340/390 4.41Billet Connecting Rod Honda GX 340 / 390 4.41 Stock Length w/Scoop
SKU: ARC6272
|
$149.95
|
|
Billet Flywheel Honda/Clone GX200Our basic billet SFI Certified flywheel model for the Honda GX160 and GX200 and the BSP "clone" engines. The keyway is fixed in the stock position and the stock pull starter can be used.
SKU: ARC6619
|
$100.00
|
|
BSP Clone GX200 Stock CrankshaftBSP Clone GX200 Stock Crankshaft
SKU: ARCDJ-1275
|
$25.00
|
|
BSP Clone GX200 stock main crankshaft bearingThis is a much better bearing than what comes in a clone engine. Visually identical to the standard bearing, but they roll WAY better. These are not ceramic or coated or anything that would be considered illegal, they are just a higher quality bearing at a great price!
SKU: ARCDJ-1295
|
$10.00
|
|
BSP/Clone Intake Manifold InsulatorIntake Manifold Insulator Stock item for Clone / GX200
SKU: ARCDJ-1235
|
$2.50
|
|
Dual Bearing Billet Sidecover for GX200/CloneFinally. . . The long anticipated Billet Sidecover for the GX200 / Clone Engine has arrived. It has the attention to detail and good looks that have come to be expected of ARC's billet products. It features side by side dual ball bearings that support the crank and gives it another fulcrum point to help eliminate any crankshaft flexing. It has a...
SKU: ARC6057
|
$139.98
|
|
GX200/Clone Air Filter Kit(1) Air Filter (1) Adapter to fit GX200/Clones (1) Choke hold bracket (1) Gasket
SKU: ARC-AIRKIT
|
$24.00
|
|
Honda/Clone Laser Cut FlangeHonda/Clone Laser Cut Flange
SKU: OMBHCF
|
$5.00
|
|
Muffler Clamp 1/2" WideHeavy duty extra wide worm gear hose clamp 1/2" wide. It can be used to hold on a muffler, clamp on flare, or straps. It is much stronger than normal hose clamps.
SKU: KPHDMC
|
$4.99
|
|
Narrow Frame Pipe Honda/CloneNarrow Frame Pipe for the Honda/Clone motor that will take a clamp on muffler.
SKU: KPHNFSCO
|
$29.95
|
|
Narrow Frame Pipe w/ Screw on Muffler Honda/CloneNarrow Frame Pipe w/ Screw on Muffler Honda/Clone
SKU: KPHNFS
|
$35.95
|
|
Rod Bearing Honda GX 340 / 390 OHVRod Bearing Honda GX 340 / 390 OHV
SKU: ARC6391
|
$22.00
|
|
|
Rod Bearings Fits Many RodsFits ARC rods with stock stroke or stroker 1" (.9985") crankshaft journals. This is the standard bearing for "Stocker" 5 HP flathead rods. Also used in our 1" journal stroker rods for Jr. Dragsters and the Stroker rods for the Animal and Honda GX200 / Clone
SKU: ARC6392
|
$10.15
|
|
Rubber Breather GrommetFits Clone or B&S 5hp engines. Inserts into the valve cover. This is an easy, handy way to hook up a catch can to catch any oily spray. Use a section of fuel line, a plastic bottle, a few zip ties, and you are in business. Remember, your catch can should always be vented to allow crankcase gasses to escape freely.
SKU: BS692187
|
$1.75
|
|
|
Tall Narrow Frame Pipe Honda/CloneTall Narrow Frame Pipe for the Honda/Clone motor that will take a clamp on muffler.
SKU: KPHNFTCO
|
$29.95
|
|
Tall Narrow Frame w/ Screw on Muffler Honda/CloneTall Narrow Frame Pipe w/ Screw on Muffler Honda/Clone
SKU: KPHNFT
|
$35.95
|
|
U Build It Exhaust Kit Honda CloneU Build It Exhaust Kit Honda Clone
SKU: KPUBI
|
$42.00
|
|
Mini Bike Dual Exhaust - Honda/CloneFits Honda / Clone - GX160, GX200
SKU: KPHDE1
|
$60.00
|
|
Mini Bike Exhaust - Honda/CloneFits Honda / Clone - GX160, GX200
SKU: KPHSE1
|
$41.00
|
|
Box Stock Header and Muffler Honda/CloneARC's header and muffler kit for the AKRA/WKA clone Box Stock class. Looking at the picture above, it is easy to see what sets ARC's header apart. The flange is funneled into the header pipe so exhaust gases flow smoothly out of the exhaust port. Contains a DJ-1138B CNC port-matched header, RLV-4117 "Mini 91" muffler, Pre-bent steel brace and t...
SKU: ARC-DJ-1138RLV
|
$41.95
|
|
ARC Billet Rod 3.303 Honda OHV GX2003.303" center-to-center. For use with the stock crankshaft and stock style (dished or flat top) piston in modified engines. Uses ARC's custom manufactured bearing inserts and ARP rod bolts manufactured specifically for ARC. ARC has the only forced oiling scoop dipper rods available for these engines providing superior lubrication at the bearin...
SKU: ARC6270
|
$59.95
|
|
|
ARC Billet Rod 3.313 Honda GX200 +.0103.313" center-to-center. For use with the stock crankshaft and stock style (dished or flat top) piston in modified engines. Uses ARC's custom manufactured bearing inserts and ARP rod bolts manufactured specifically for ARC. ARC has the only forced oiling scoop dipper rods available for these engines providing superior lubrication at the bearin...
SKU: ARC6269
|
$59.95
|
|
|
ARC Billet Rod 3.323 Honda GX200 +.0203.323" center-to-center. For use with the stock crankshaft and stock style (dished or flat top) piston in modified engines. Uses ARC's custom manufactured bearing inserts and ARP rod bolts manufactured specifically for ARC. ARC has the only forced oiling scoop dipper rods available for these engines providing superior lubrication at the bearin...
SKU: ARC6271
|
$59.95
|
|
Dyno Mod2 Cheater Stock Cam"Mod 2" Cheater Stock Cam for Honda GX200, BSP, or Blue Clone 6.5 HP engines
SKU: ARCDJ-1111
|
$50.00
|
|
|
Super X Dyno CamThis cam provides .265" lift at the cam, which works out to .275" lift with the stock rockers. Intake duration is 236 and Exhaust duration is 236. Popular for Superbox, F200, or other limited mod application. Our Superbox, or Valve spring upgrade kit #2 along with a billet rod (ARC6270) and billet flywheel(ARC6619 or ARC6618) is needed for added...
SKU: ARCDJ-1110
|
$50.00
|
Your cart
Recently Viewed
Bestsellers
RSS Feeds
LATEST NEWS
01-23-2012
We've been expanding our lawn mower parts inventory for the past few weeks. This week we've been focusing on belts!
INFORMATION
OMB WAREHOUSE
OMB Warehouse is geared towards mini bike and go-kart enthusiasts as well as all owners of outdoor power equipment. Our online catalog grows daily and features a large variety of parts for your hobbies and your work! We are a family owned business and strive hard to run our company efficiently and always with customer service in mind.
CONTACT US
OMB Warehouse
2550 Edgely Road
Levittown, PA 19057
Users online:
76
anonymous customer(s)
