Cart is empty
Cart is empty
Phone orders: (267) 580-5824
Categories
Manufacturers
Special
Bonanza
Replacement Bonanza MiniBike Parts
Displaying all products from Bonanza
Image |
Product | Add |
|---|---|---|
|
Bonanza BC Seat 18"Reproduction Bonanza Seat. Stitched Pleats. Black with Gold Piping Overall length 18" - with mounting holes @ 7-1/2" & 14"
SKU: OMBBONANZASEAT
|
$65.00
|
|
Bonanza Chain Guard Bracket (No Jackshaft)Replacement Bonanza Chain Guard Brackets (non-jackshaft bike). Zinc Plated Use with our fiberglass bonanza chain guard
SKU: OMBCGBRKT10
|
$18.99
|
|
Bonanza Chain Guard Bracket (w/Jackshaft)Replacement Bonanza Chain Guard Brackets (jackshaft bike). Zinc Plated Use with our fiberglass bonanza chain guard
SKU: OMBCGBRKT20
|
$18.99
|
|
Bonanza Fiberglass Chain GuardReproduction Fiberglass chain guard for Bonanza. May fit other models. Must drill your own holes and use existing brackets or purchase new (available from OMBWarehouse)
SKU: OMBBFCG25
|
$45.00
|
|
Bonanza MX Front Fender (Fiberglass)Bonanza MX Front Fender (Fiberglass) Reproduction Need to drill your own holes. Mounting brackets are available in raw steel and chrome (from OMBWarehouse).
SKU: OMBMXFF
|
$42.99
|
|
Bonanza MX Front Fender BracketBonanza MX Front Fender Bracket - Made of thicker steel than the originals. Not a 100% duplicate. Raw steel to be primed/painted or powder coated.
SKU: OMBBMXF
|
$22.99
|
|
Bonanza MX Front Fender Bracket ChromeBonanza MX Front Fender Bracket Chrome - Made of thicker steel than the originals. Not a 100% duplicate. Not show chrome. May have some minor imperfections.
SKU: OMBBMXFC
|
$38.99
|
|
Bonanza MX Rear Fender (Fiberglass)Bonanza MX Rear Fender (Fiberglass) Reproduction Need to drill your own holes. Mounting bracket are available in raw steel (from OMBWarehouse)
SKU: OMBMXRF
|
$42.99
|
|
Bonanza MX Rear Fender BracketReplacement rear fender bracket for Bonanza MX Series Mini Bikes.
SKU: OMBBMXR
|
$19.99
|
|
Bonanza MX Rear Fender Bracket ZincReplacement rear fender bracket for Bonanza MX Series Mini Bikes. Zinc plated. Ready for paint, or use as-is.
SKU: OMBBMXRZ
|
$29.99
|
|
Bonanza MX Tank BracketsBonanza MX Gas Tank Brackets / Straps - Zinc Plated
SKU: OMBMXTB
|
$19.99
|
|
Bonanza Replacement Clutch Cover - ChromeDirect replacement chrome clutch cover for the CR400/410 choppers and some of the MB series bikes. 8" long. Has two 5/16"mounting slots. This is not show chrome and may have a few imperfections.
SKU: SBBCG1
|
$49.99
|
|
Hodaka Motor MountsReproduction Hodaka Motor Mounts copied directly from an NOS set. These engine mounts were laser cut and formed, not made from milled angle iron. Powder coated black and ready to use.
SKU: OMBHODAKAMNT
|
$45.00
|
|
SwingArm Shaft Later Mid-Peg BC - Fits BonanzaSwingArm Shaft for later mid- Peg BC Bonanza (8-3/4 between plates) Made in U.S.A
SKU: SBSA875
|
$13.95
|
|
#40/41 Sprocket 45T - 5” Drum fits Kidney Bean, Spinner & MX wheels45 tooth sprocket(3/16 thick) for 40/41 chain. 5” brake drum. 1-5/8” center hole. 5/16 mounting holes on a 3-1/4” bolt circle. Yellow Zinc plated. Fits Kidney Bean, Bonanza MX, Azusa Spinner, Gilson wheels Proudly made in the U.S.A
SKU: SBKB45
|
$49.95
|
|
Fold Up Foot Pegs - Zinc - Fits BonanzaDirect replacement for Bonanza BC series bikes that have the footpegs mounted up front. 5" long and mount on 5/8 bar. 1/4" mounting hole. Clear Zinc Plated. May fit other MiniBikes as well, check your application. Made in U.S.A
SKU: SBFP10
|
$26.95
|
|
Weld on Jackshaft Plates - Fits Bonanza3-5/8" wide x 3" tall. 1-3/8" bearing bores, 5/8 swing arm/scrub brake holes, 11/32 hole. These need to be welded on to your bike. Correct for most Bonanza BC series bikes. Made in U.S.A
SKU: SBJSP10
|
$24.95
|
|
Chrome Front Fork Lower Kit - Fits BonanzaChrome Fork Lower Kit Includes: 2 Chrome fork lowers, 2 chrome retainers and a pair of SBSPR55 springs. Fork lowers are 12-3/4” OAL., 13/16”(.812) dia., Fits 5/8” Axle. Direct replacement for Bonanza BC series bikes. May fit others as well, check your application. Made in U.S.A
SKU: SBFFL12
|
$89.95
|
|
72T Sprocket 5” Drum for 6” GoPowerBonanza Replacement 72 tooth sprocket for #35 chain. 5” brake drum. 3 Posts on back with ¼-20 thread to mount to 6” GoPower wheel. Yellow Zinc plated.
SKU: SBGP72
|
$64.95
|
|
5.5” Fork and Shock Springs - Fits Bonanza5-1/2” OAL., .790OD,.540 ID, .125 wire diameter. Direct replacement for the front forks on Bonanza BC series bikes and the tube type rear shocks on Bonanza BC 1200/1300. May fit others as well, check your application. Made in U.S.A
SKU: SBSPR55
|
$12.95
|
|
9-5/16 x 5/8 Jackshaft - Fits Bonanza9-5/16" (overall length), 9" between SnapRings , 5/8 dia., 3/16 keyway. Direct replacement for the front peg(8-1/4" between JackShaft plates) Bonanza BC series bikes. Made in U.S.A
SKU: SBJS825
|
$16.95
|
|
UnderSeat Gas Tank Mount - Zinc - Fits BonanzaDirect replacement for Bonanza BC series bikes with round gas tank under the seat. 9" OAL. Cross bar is 3-1/2". Has a 5\16 mounting hole and a 5\16x7\8 slot. 6-1/2" from center of hole to center of slot. May be used on other MiniBikes as well, check your application. Clear Zinc plated. Made in U.S.A
SKU: SBTM10
|
$24.95
|
|
9-13/16 x 5/8 Jackshaft - Fits mid-peg BC Bonanzas9-13/16" (overall length), 9-1/2" between SnapRings , 5/8 dia., 3/16 keyway. Direct replacement for the mid-peg(8-3/4" between JackShaft plates) Bonanza BC series bikes. Made in U.S.A
SKU: SBJS875
|
$16.95
|
|
60T Sprocket 5” Drum - Kidney Bean, MX/Spinner WheelsBonanza Replacement 60 tooth sprocket for #35 chain. 5” brake drum. 1-5/8” center hole. 5/16 mounting holes on a 3-1/4” bolt circle. Yellow Zinc plated. Fits Kidney Bean, Bonanza MX, Azusa Spinner, Gilson wheels
SKU: SBKB60
|
$54.95
|
|
9-1/16 x 5/8 SwingArm Shaft - Fits Bonanza9-1/16" (overall length), 8-3/4" between SnapRings, 5/8" dia.. Direct replacement shaft for the front peg(8-1/4" between Jack Shaft plates) Bonanza BC series bikes. Made in U.S.A
SKU: SBSA825
|
$13.95
|
|
72T Sprocket 5” Drum - Kidney Bean, MX/Spinner WheelsBonanza Replacement 72 tooth sprocket for #35 chain. 5” brake drum. 1-5/8” center hole. 5/16 mounting holes on a 3-1/4” bolt circle. Yellow Zinc plated. Fits Kidney Bean, Bonanza MX, Azusa Spinner, Gilson wheels
SKU: SBKB72
|
$54.95
|
|
60T Sprocket - 5” Drum for 6” GoPowerBonanza Replacement 60 tooth sprocket for #35 chain. 5” brake drum. 3 Posts on back with ¼-20 thread to mount to 6” GoPower wheel. Yellow Zinc plated.
SKU: SBGP60
|
$64.95
|
|
#40/41 Sprocket 40T - 5” Drum fits Kidney Bean, Spinner & MX wheels40 tooth sprocket(3/16 thick) for 40/41 chain. 5” brake drum. 1-5/8” center hole. 5/16 mounting holes on a 3-1/4” bolt circle. Yellow Zinc plated. Fits Kidney Bean, Bonanza MX, Azusa Spinner, Gilson wheels 8" MX/Spinner Wheel Proudly made in the U.S.A
SKU: SBKB40
|
$59.95
|
LATEST NEWS
01-23-2012
We've been expanding our lawn mower parts inventory for the past few weeks. This week we've been focusing on belts!
INFORMATION
OMB WAREHOUSE
OMB Warehouse is geared towards mini bike and go-kart enthusiasts as well as all owners of outdoor power equipment. Our online catalog grows daily and features a large variety of parts for your hobbies and your work! We are a family owned business and strive hard to run our company efficiently and always with customer service in mind.
CONTACT US
OMB Warehouse
2550 Edgely Road
Levittown, PA 19057
Users online:
69
anonymous customer(s)
