Cart
Cart is empty
Categories
Manufacturers
Recently Viewed
Bestsellers
Special
RSS Feeds
Frame Parts
Replacement Bonanza Frame Parts
Displaying all products from Frame Parts
Image |
Product | Add |
|---|---|---|
|
Bonanza BC Seat 18"Reproduction Bonanza Seat. Stitched Pleats. Black with Gold Piping Overall length 18" - with mounting holes @ 7-1/2" & 14"
SKU: OMBBONANZASEAT
|
$65.00
|
|
Hodaka Motor MountsReproduction Hodaka Motor Mounts copied directly from an NOS set. These engine mounts were laser cut and formed, not made from milled angle iron. Powder coated black and ready to use.
SKU: OMBHODAKAMNT
|
$45.00
|
|
Hodaka Motor Mounts Chrome PlatedReproduction Hodaka Motor Mounts copied directly from an NOS set. These engine mounts were laser cut and formed, not made from milled angle iron. Single dip / Flash chrome plated and ready to use!
SKU: OMBHODAKAMNTC
|
$50.00
|
|
Bonanza Replacement Clutch Cover - ChromeDirect replacement chrome clutch cover for the CR400/410 choppers and some of the MB series bikes. 8" long. Has two 5/16"mounting slots. This is not show chrome and may have a few imperfections.
SKU: SBBCG1
|
$49.99
|
|
Bonanza Fiberglass Chain GuardReproduction Fiberglass chain guard for Bonanza. May fit other models. Must drill your own holes and use existing brackets or purchase new (available from OMBWarehouse)
SKU: OMBBFCG25
|
$45.00
|
|
Bonanza Chain Guard Bracket (No Jackshaft)Replacement Bonanza Chain Guard Brackets (non-jackshaft bike). Zinc Plated Use with our fiberglass bonanza chain guard
SKU: OMBCGBRKT10
|
$18.99
|
|
Bonanza Chain Guard Bracket (w/Jackshaft)Replacement Bonanza Chain Guard Brackets (jackshaft bike). Zinc Plated Use with our fiberglass bonanza chain guard
SKU: OMBCGBRKT20
|
$18.99
|
|
UnderSeat Gas Tank Mount - Zinc - Fits BonanzaDirect replacement for Bonanza BC series bikes with round gas tank under the seat. 9" OAL. Cross bar is 3-1/2". Has a 5\16 mounting hole and a 5\16x7\8 slot. 6-1/2" from center of hole to center of slot. May be used on other MiniBikes as well, check your application. Clear Zinc plated. Made in U.S.A
SKU: SBTM10
|
$24.95
|
|
Bonanza MX Front Fender (Fiberglass)Bonanza MX Front Fender (Fiberglass) Reproduction Need to drill your own holes. Mounting brackets are available in raw steel and chrome (from OMBWarehouse).
SKU: OMBMXFF
|
$45.99
|
|
Bonanza MX Front Fender Bracket ChromeBonanza MX Front Fender Bracket Chrome - Made of thicker steel than the originals. Not a 100% duplicate. Not show chrome. May have some minor imperfections.
SKU: OMBBMXFC
|
$38.99
|
|
Bonanza MX Front Fender BracketBonanza MX Front Fender Bracket - Made of thicker steel than the originals. Not a 100% duplicate. Raw steel to be primed/painted or powder coated.
SKU: OMBBMXF
|
$22.99
|
|
Bonanza MX Rear Fender (Fiberglass)Bonanza MX Rear Fender (Fiberglass) Reproduction Need to drill your own holes. Mounting bracket are available in raw steel (from OMBWarehouse)
SKU: OMBMXRF
|
$47.99
|
|
Bonanza MX Rear Fender Bracket ZincReplacement rear fender bracket for Bonanza MX Series Mini Bikes. Zinc plated. Ready for paint, or use as-is.
SKU: OMBBMXRZ
|
$29.99
|
|
Bonanza MX Rear Fender BracketReplacement rear fender bracket for Bonanza MX Series Mini Bikes.
SKU: OMBBMXR
|
$19.99
|
|
Fold Up Foot Pegs - Zinc - Fits BonanzaDirect replacement for Bonanza BC series bikes that have the footpegs mounted up front. 5" long and mount on 5/8 bar. 1/4" mounting hole. Clear Zinc Plated. May fit other MiniBikes as well, check your application. Made in U.S.A
SKU: SBFP10
|
$26.95
|
|
Bonanza MX Tank BracketsBonanza MX Gas Tank Brackets / Straps - Zinc Plated
SKU: OMBMXTB
|
$19.99
|
|
Weld on Jackshaft Plates - Fits Bonanza3-5/8" wide x 3" tall. 1-3/8" bearing bores, 5/8 swing arm/scrub brake holes, 11/32 hole. These need to be welded on to your bike. Correct for most Bonanza BC series bikes. Made in U.S.A
SKU: SBJSP10
|
$24.95
|
|
9-5/16" x 5/8" Jackshaft - Fits Bonanza Front Peg9-5/16" (overall length), 9" between SnapRings , 5/8" diameter, 3/16" keyway. Direct replacement for the front peg (8-1/4" between jackshaft plates) Bonanza BC series bikes. Made in U.S.A
SKU: SBJS825
|
$16.95
|
|
9-13/16" x 5/8" Jackshaft - Fits Bonanza Mid-Peg9-13/16" (overall length), 9-1/2" between SnapRings, 5/8" diameter, 3/16" keyway. Direct replacement for the mid-peg (8-3/4" between jackshaft plates) Bonanza BC series bikes. Made in U.S.A
SKU: SBJS875
|
$16.95
|
|
9-1/16" x 5/8" SwingArm Shaft - Fits Bonanza Front Peg9-1/16" (overall length), 8-3/4" between snaprings, 5/8" diameter. Direct replacement shaft for the front peg (8-1/4" between Jack Shaft plates) Bonanza BC series bikes. Made in U.S.A.
SKU: SBSA825
|
$13.95
|
|
SwingArm Shaft- Fits Bonanza Mid-PegSwingArm Shaft for later mid-peg BC Bonanza (8-3/4 between plates). Made in U.S.A.
SKU: SBSA875
|
$13.95
|
LATEST NEWS
03-20-2012
We are having a T-Shirt sale until we run out - $10 for most sizes - click here to see our Old Mini Bikes gear!
INFORMATION
OMB WAREHOUSE
OMB Warehouse is geared towards mini bike and go-kart enthusiasts as well as all owners of outdoor power equipment. Our online catalog grows daily and features a large variety of parts for your hobbies and your work! We are a family owned business and strive hard to run our company efficiently and always with customer service in mind.
CONTACT US
OMB Warehouse
2550 Edgely Road
Levittown, PA 19057
Users online:
95
anonymous customer(s)
